Ultra Lightweight Woven Fusible Interfacing IS8030 – berensteintextiles

This Ultra Lightweight Woven Fusible Interfacing IS8030 is suitable for all woven fabrics such as silk dresses, skirts and blouses. This fabric is wonderfully lightweight fusible interfacing that serves protection and body for your garment. Woven from 100% Nylon yarns, this sheer, graceful fabric is pre-treated for eas

This Ultra Lightweight Woven Fusible Interfacing IS8030 is suitable for all woven fabrics such as silk dresses, skirts and blouses. This fabric is wonderfully lightweight fusible interfacing that serves protection and body for your garment. Woven from 100% Nylon yarns, this sheer, graceful fabric is pre-treated for easy fusing and has a touch of stretch for added flexibility.

Content:
100% Nylon

Structure:
Stability in the lengthwise grain and slight give in the cross grain
58/60 Inches Wide
34 grams
Fusible - Pre-Treated
IS 8030

Hand:
lightweight and soft

Luster:
This fabric has no shine

Tips and Tricks:

• Heat and moisture melt the resin, and pressure pushes it into the fibers
• Read the instructions with the interfacing
• Cover the pressing surface with paper towels. Place the fabric wrong side up on the paper towels
• Place the interfacing resin side down on the fabric
• HINT: When fusing to a portion of a section, trim the edge with pinking shears to avoid a demarcation line
• Cover with a press cloth, dry or wet depending on the instructions
• Baste press lightly in several areas if the section is large
• NOTE: When working with loosely woven fabrics, the garment section is frequently larger than the interfacing, even though they were cut thy the same pattern. Do not force the edges to match; the fashion fabric has stretched out of shape. If you have cut accurately, the use the interfacing as a guide.
• Set Iron on Wool
• Beginning in the center of the section, fuse toward the edges. Press hard with steam, unless the instructions indicate otherwise for 10 to 15 seconds. Overlap the fused areas carefully to avoid a bare section. do not slide the iron
• Turn the section over, cover with a press cloth and fuse the other side
• Allow the section to cool before moving it
• Test to make sure all corners are securely fused

Care:
Interfacings should have the same care requirements as the garments

Material: TFL thermally fused laminate;engineered composite;Wood Country Of Origin: USA Model Number: PLS36

Pellon Lightweight Sew-in Interfacing (PLS36)

Light woven interlining, soft to the touch. Washable up to 30°C. For stabilization on the desired parts of materials, versatile. Available in white.

Light Woven Interfacing | BINIBOO Shop

Lightweight non-woven fusible interfacing specifically made for lightweight and delicate materials such as silk, chambray, crepe calico, and challis

HeatnBond Fusible Interfacing Non-Woven Lightweight, 20 x 25 Yards

Interfacing Archives - North Country Quilters & Sew 'n Vac, LLC

Iron-on Interfacing, Used as 3rd layer on Face Masks, Non-woven fusible interfacing , 58 Wide, No Stretch, Thermal bonded non-woven polyester, Widely

Fusible Interfacing Fabric - lightweight - Suitable for Face Masks - Non Woven - 58 Wide - Sold by the Yard

Pellon 783 Lightweight Woven Sew In Interfacing 20 Wide

Pellon 906F Fusible Fabric Interfacing. White. 15 x 3 Yards Precut Package. 1 Pack. Pellon 906F Sheer-Weight Fusible Interfacing. Color: White. Size

Pellon 906F Fusible Fabric Interfacing, White 15 x 3 Yards Precut 906FPLKG

Pellon Sew-In Interfacing - lightweight Non Woven - White – Fabricville

Pellon Sew-In Interfacing - lightweight Non Woven - White – Fabricville

Sew Woven Fusible Interfacing – Sew Yours

PELLON – SF568 – White Woven Single Sided Fusible Lightweight Interfacing – Shape-Flex – 20″ Wide – 100% Cotton – CREEKSIDE QUILTS